Human activity recognition (HAR) has gained significant attention due to its applications in health monitoring, intelligent environments, and human-computer interaction Hussain, Khan, Khan, Bhatt, Farouk, Bhola, and Baik (2024); Mishra, Gupta, Gupta, and Dutta (2022). Traditional HAR approaches employed wearable inertial sensors, vision-based methods, and environmental sensors for HAR. However, each method has inherent limitations such as discomfort, privacy concerns, or complex deployment requirements Wang, Huang, Zhao, Zhu, Huang, and Wu (2024); Mishra and Gupta (2025). The human body engages with its environment in diverse ways, one of which is the interaction between the lungs and the external environment through the act of breathing via the nose. The breathing pattern encompasses plenty of useful information that can be processed to fetch different behaviours and health information Mongelli, Orani, Cambiaso, Vaccari, Paglialonga, Braido, and Catalano (2020); Zhang, Wang, and Li (2024). Moreover, the breathing patterns are influenced by metabolic and physiological factors, offering a non-invasive and unobtrusive means of HAR.

Robot swarms offer the potential to serve a variety of distributed sensing applications. An interesting real-world application that stands to benefit significantly from deployment of swarms is structural monitoring, where traditional sensor networks face challenges in structural coverage due to their static nature. This paper investigates the deployment of a swarm of miniaturized vibration sensing robots to inspect and localize structural damages on a surface section within a high-fidelity simulation environment. In particular, we consider a 1 m x 1 m x 3 mm steel surface section and utilize finite element analysis using Abaqus to obtain realistic structural vibration data. The resulting vibration data is imported into the physics-based robotic simulator Webots, where we simulate the dynamics of our surface inspecting robot swarm. We employ (i) Gaussian process estimators to guide the robots' exploration as they collect vibration samples across the surface and (ii) operational modal analysis to detect structural damages by estimating and comparing existing and intact structural vibration patterns. We analyze the influence of exploration radii on estimation uncertainty and assess the effectiveness of our method across 10 randomized scenarios, where the number, locations, surface area, and depth of structural damages vary. Our simulation studies validate the efficacy of our miniaturized robot swarm for vibration-based structural inspection.

Hubin Zhao (hubin.zhao@ucl.ac.uk), and Luigi G. Occhipinti (lgo23@cam.ac.uk) Abstract At-home rehabilitation for post-stroke patients presents significant challenges, as continuous, personalized care is often limited outside clinical settings. Additionally, the absence of comprehensive solutions addressing diverse rehabilitation needs in home environments complicates recovery efforts. Here, we introduce a smart home platform that integrates wearable sensors, ambient monitoring, and large language model (LLM)-powered assistance to provide seamless health monitoring and intelligent support. The system leverages machine learning enabled plantar pressure arrays for motor recovery assessment (94% classification accuracy), a wearable eye-tracking module for cognitive evaluation, and ambient sensors for precise smart home control (100% operational success, <1 s latency). Additionally, the LLM-powered agent, Auto-Care, offers real-time interventions, such as health reminders and environmental adjustments, enhancing user satisfaction by 29%. This work establishes a fully integrated platform for long-term, personalized rehabilitation, offering new possibilities for managing chronic conditions and supporting aging populations. Stroke is the third leading cause of disability worldwide, affecting more than 101 million people [1, 2]. Post-stroke recovery is not only a prolonged process but also a resource-intensive one, imposing significant economic and caregiving burdens on families and healthcare systems--a challenge exacerbated by global aging [5]. For many patients, the home becomes a critical environment for rehabilitation, as opportunities for continuous and personalized care are limited outside of clinical settings [6].

In this paper, we study cost-effective home robot solutions which are designed for home health monitoring. The recent advancements in Artificial Intelligence (AI) have significantly advanced the capabilities of the robots, enabling them to better and efficiently understand and interact with their surroundings. The most common robots currently used in homes are toy robots and cleaning robots. While these are relatively affordable, their functionalities are very limited. On the other hand, humanoid and quadruped robots offer more sophisticated features and capabilities, albeit at a much higher cost. Another category is educational robots, which provide educators with the flexibility to attach various sensors and integrate different design methods with the integrated operating systems. However, the challenge still exists in bridging the gap between affordability and functionality. Our research aims to address this by exploring the potential of developing advanced yet affordable and accessible robots for home robots, aiming for health monitoring, by using edge computing techniques and taking advantage of existing computing resources for home robots, such as mobile phones.

The present paper is concerned with deep learning techniques applied to detection and localization of damage in a thin aluminum plate. We used data generated on a tabletop apparatus by mounting to the plate four piezoelectric transducers, each of which took turn to generate a Lamb wave that then traversed the region of interest before being received by the remaining three sensors. On training a neural network to analyze time-series data of the material response, which displayed damage-reflective features whenever the plate guided waves interacted with a contact load, we achieved a model that detected with greater than 99% accuracy in addition to a model that localized with $3.14 \pm 0.21$ mm mean distance error and captured more than 60% of test examples within the diffraction limit. For each task, the best-performing model was designed according to the inductive bias that our transducers were both similar and arranged in a square pattern on a nearly uniform plate.

Deriving health indicators of rotating machines is crucial for their maintenance. However, this process is challenging for the prevalent adopted intelligent methods since they may take the whole data distributions, not only introducing noise interference but also lacking the explainability. To address these issues, we propose a diffusion-based weakly-supervised approach for deriving health indicators of rotating machines, enabling early fault detection and continuous monitoring of condition evolution. This approach relies on a classifier-free diffusion model trained using healthy samples and a few anomalies. This model generates healthy samples. and by comparing the differences between the original samples and the generated ones in the envelope spectrum, we construct an anomaly map that clearly identifies faults. Health indicators are then derived, which can explain the fault types and mitigate noise interference. Comparative studies on two cases demonstrate that the proposed method offers superior health monitoring effectiveness and robustness compared to baseline models.

In recent years, Artificial Neural Networks (ANNs) have been introduced in Structural Health Monitoring (SHM) systems. A semi-supervised method with a data-driven approach allows the ANN training on data acquired from an undamaged structural condition to detect structural damages. In standard approaches, after the training stage, a decision rule is manually defined to detect anomalous data. However, this process could be made automatic using machine learning methods, whom performances are maximised using hyperparameter optimization techniques. The paper proposes a semi-supervised method with a data-driven approach to detect structural anomalies. The methodology consists of: (i) a Variational Autoencoder (VAE) to approximate undamaged data distribution and (ii) a One-Class Support Vector Machine (OC-SVM) to discriminate different health conditions using damage sensitive features extracted from VAE's signal reconstruction. The method is applied to a scale steel structure that was tested in nine damage's scenarios by IASC-ASCE Structural Health Monitoring Task Group.

In recent years, there has been an increased focus on early detection, prevention, and prediction of diseases. This, together with advances in sensor technology and the Internet of Things, has led to accelerated efforts in the development of personal health monitoring systems. Semantic technologies have emerged as an effective way to not only deal with the issue of interoperability associated with heterogeneous health sensor data, but also to represent expert health knowledge to support complex reasoning required for decision-making. This study evaluates the state of the art in the use of semantic technologies in sensor-based personal health monitoring systems. Using a systematic approach, a total of 40 systems representing the state of the art in the field are analysed. Through this analysis, six key challenges that such systems must overcome for optimal and effective health monitoring are identified: interoperability, context awareness, situation detection, situation prediction, decision support, and uncertainty handling. The study critically evaluates the extent to which these systems incorporate semantic technologies to deal with these challenges and identifies the prominent architectures, system development and evaluation methodologies that are used. The study provides a comprehensive mapping of the field, identifies inadequacies in the state of the art, and provides recommendations for future research directions.

Imagine having a virtual version of yourself, a digital twin, that can help you make better decisions about your health and lifestyle. Sounds like science fiction, right? Well, with the advancements in artificial intelligence (AI) and personalized health monitoring, this concept is becoming a reality. In this article, we'll explore how AI-driven personalized health monitoring is changing the way we approach healthcare and what it means for the future of medicine. A digital twin is a virtual replica of a physical object, system, or even a human being.

Studies show dramatic increase in elderly population of Western Europe over the next few decades, which will put pressure on healthcare systems. Measures must be taken to meet these social challenges. Healthcare robots investigated to facilitate independent living for elderly. This paper aims to review recent projects in robotics for healthcare from 2008 to 2021. We provide an overview of the focus in this area and a roadmap for upcoming research. Our study was initiated with a literature search using three digital databases. Searches were performed for articles, including research projects containing the words elderly care, assisted aging, health monitoring, or elderly health, and any word including the root word robot. The resulting 20 recent research projects are described and categorized in this paper. Then, these projects were analyzed using thematic analysis. Our findings can be summarized in common themes: most projects have a strong focus on care robots functionalities; robots are often seen as products in care settings; there is an emphasis on robots as commercial products; and there is some limited focus on the design and ethical aspects of care robots. The paper concludes with five key points representing a roadmap for future research addressing robotic for elderly people.